Alexia Table Lamp by Fakasaka




Alexia Table Lamp features a polished cast bronze body. The Alexia is sold without a shade. Made in Brazil.
Alexia Table Lamp by Fakasaka
Alexia Table Lamp features a polished cast bronze body. The Alexia is sold without a shade. Made in Brazil.
Width 13.8″
Depth 13.8″
Height 33.9″
Electrical: One E26 socket, wired for incandescent or LED. 10w LED max, 60w incandescent max. SVDA recommends the use of LED bulbs. Optional UL Listing.
Use and Care Guide
FAKASAKA
Marble, Granite, General Stone
Maintenance:
-Use a damp cloth with neutral pH detergent
-Dry with a clean, soft cloth
-Avoid leaving liquids on the surface for too long
-In case of stains, wipe immediately with warm water and neutral detergent
-Do not use vinegar, lemon or acidic cleaners
-Do not use bleach or chlorine based products
-Do not use steel wool or abrasive sponges
-For added surface protection apply a professional stone sealer every 6 to 12 months
Precautions:
-Avoid hard impacts, especially on edges
-Avoid dragging heavy objects directly across the surface
-Avoid cutting food directly on the stone – always use a cutting board
Restoration:
-This should be done by a qualified professional to ensure proper application and avoid damage to the surface
Cast Bronze and Brass
Maintenance:
-Use a soft, dry microfiber cloth or one slightly dampened with water
-If needed: add a drop of neutral pH detergent diluted in warm water.
-Do not over-wet
-Always dry immediately after cleaning with a clean, dry cloth
-Remove dust buildup in carved or detailed areas with a soft-bristle brush. Take care not
to scratch the surface.
-Do not use vinegar, lemon or acidic cleaners
-Do not use bleach or chlorine based products
-Do not use products that contain alcohol, acetone or damaging solvents
-Do not use steel wool or abrasive sponges
Precautions:
-Avoid direct sunlight exposure which can cause yellowing and/or cracking of varnish over time
-Avoid humidity levels over 55% which can accelerate corrosion if varnish fails
Restoration:
-This should be done by a qualified professional to ensure proper application and avoid damage to the surface