Woods
WUD pieces are stained and/or polished to enhance the natural depth and beauty of each finish. While most surfaces are protected with a clear coat or wax, they remain susceptible to wear over time.
• Maintenance: Gently dust with a soft, dry cloth. For light cleaning, use a slightly damp, soft cloth. For deeper cleaning, a mild vinegar and water solution can be applied with a soft cloth. Avoid using commercial, acidic, or abrasive cleaning products on wooden surfaces.
• Important Environmental Information:
-Avoid placing hot or moist objects directly on wood surfaces. Rubber or plastic left in contact with the finish may cause damage.
-Be mindful of sharp objects that could scratch the surface.
-Do not place wood pieces near heat sources, air conditioning vents, or direct sunlight to prevent drying or fading.
-Maintain indoor humidity levels between 35–45% to prevent cracking or warping due to moisture fluctuations.
-Excessive moisture can lead to swelling and distortion of wood components.
• Restoration: For deeply stained or heavily soiled wood pieces, we recommend professional cleaning or refinishing.

Metals
Most WUD metal components are finished with a live surface unless otherwise specified. These finishes are designed to age and patina naturally over time.
• Maintenance: Wipe with a soft, slightly damp cloth. Do not use commercial, acidic, or abrasive cleaners, polishes, or waxes, as these may scratch or damage the finish.
• Restoration: To refresh or restore a polished appearance on both live and non-live finishes, we recommend professional cleaning and polishing.

Metal + Resin
• Maintenance: Clean surfaces with Windex or a mild countertop cleaner, applied to a soft cloth. For minor surface scratches, apply a small amount of mineral oil, gently rub with a soft cloth, then clean the area again with a mild spray and dry cloth.

• Important Environmental Information:
-Keep pieces away from heat sources, air conditioning vents, and direct sunlight to avoid fading or drying.
-Maintain consistent humidity (35–45%) to prevent cracking or warping.
-Do not expose wood or resin surfaces to excess moisture or extreme environmental shifts.
-Use coasters or pads to prevent heat or moisture rings.
-Avoid contact with rubber, plastic, or sharp objects which may mar the surface.
• Restoration: To restore the surface of metal or resin elements, professional cleaning and polishing are recommended.

Print